FluidPRO is proud to announce our US flagship operation in Arnegard, North Dakota.
We look forward to expanding the Company’s vision to provide customers with the most effective and exemplary services, using safety and experience to fuel our motivation to become the most sought-after service company in the oilfield today, tomorrow and future years to come.
We’re experts at fluid pumping and can handle slow or high-pressure pumping with our customized units.
Top-notch employees and new, state-of-the-art equipment is what gets the job done, and done well. FluidPRO maintains a large fleet of fluid pumping trucks to service our customer’s needs.
Fluid Pumping Services
FluidPRO utilizes two types of fluid pumping trucks. “We offer a wide range of fluid-pumping capabilities,” explains Chad McFarland, FluidPRO CEO. “We can handle slow or high-pressure pumping, and we’ve customized these units to the customers’ needs, further eliminating costs to our customers.”
Fluid pumping – 5k to 15k
Equipment specs
- Hose reel set up for holding back pressure while pumping down tubing, or small pumping jobs at 5k
- 120 feet of 2-inch 1502 line pipe on unit
- Can haul 5m3 of fluid to location with TDG spec tank
- Data recording system with charts and second-by-second data provided on data stick to customer
Extra equipment
- Iron package
- Safety sling package
- Capable of hauling chemical totes to location for coil support
Pumping specifications
- Pumping rates from 1200l/min to as slow as 30l/min
- Pumping pressure from 0 to 104mpa
- Mixing gel plugs on the fly
Combined unit specifications
- Units daisy chained together can create a twin with rates as high as 1500l/min
- Pump 1000l/min at 40mpa
Twin fluid pumper – 15K 2000HP Twin
Equipment specs
- Two 800 HP Cat engines with quint 15K 3″ fluid ends
- 400 HP auxiliary hydraulic engine
- Cat 6 speed transmissions with 2 speed auxiliary gear reduction
- 200 ft. of 2-inch 1502 line pipe on unit
- 120 ft. of 4-inch petroleum suction hoses with stainless steel cam locks
- Data recording system with ability to build charts and second-by-second data which can be loaded onto a data stick for the customer
- Ability to suck back on own iron with a gear pump, eliminating the need for a vac truck
- Built-in chemical pumps
- 2-750L heated chemical storage totes built onto unit
- Built-in electronic overpressure switches
- Manual PRV on fluid ends for backup.
Job Scopes
- High Rate DFITS
- Packer inflation
- Coil Support
- Wireline pump downs
- Frac Support
- Standalone pumping
- Mix & Pumping weighted fluid for well control
- Acid Squeeze
- Injection Tests
Pumping Specifications
- Pumping rates as low as 80L/min to 1200L/min at 50 mpa
- Pumping rates as high as 2500L/min at 10 mpa
- Pumping Pressure from 0 to 100 mpa
- Mixing gel plugs on the fly in on-board mixing tanks
- Mixing KCL water
High Rate Fluid Pumper – 15K 2500HP Quint Fluid
Equipment specs
- 2500 HP Cat engine with quint 15K 3″ fluid ends
- Cat 7 Speed transmission
- 400 ft. of 3-inch 1502 line pipe package
- Data recording system with ability to build charts and second-by-second data which can be loaded onto a data stick for the customer
- Ability to supply its own fluid with on board pressurizer
- Built-in electronic overpressure switches
Job Scopes
- High Rate DFITS
- Packer inflation
- Coil Support
- Wireline pump downs
- Frac Support
- Standalone pumping
- Injection Tests
Pumping Specifications
- Pumping rates as low as 300L/min to 1900L/min at 45 mpa
- Pumping rates as high as 2700L/min at 20 mpa
- Pumping Pressure from 0 to 100 mpa
Hot Oilers & Pressure Trucks
15K Hot Oiler
- 15K 7 Million BTU Hot Oiler
- Pumping rates from 0 to 800L/min affected by pressure
- Can heat a 400bbl from 0c to 30c in 60 minutes
- Can heat and pump as slow as 300L/min to as fast as 800L/min
- Can be run in series or parallel coil setup for faster/slower circulation of fluid
- Can circulate fluid through burner at 1200L/min and get a 30c temperature spread on the fluid from intake to discharge
- Full data aquisition system with charts and second by second data
- Can hold 6m3 of fluid in tanks for infield work
- TDG spec tank
- 4m3 diesel tank
- 15k Weir SPM triplex pump
- 5K hose reel with 75 ft. of hose for smaller jobs
- 120 ft. of 2″ 1502 hard line on unit
15K Pressure Truck
- 15K low rate pressure truck
- Pumping rates from 0-150L/min
- Can pump 150L/min at 15K
- Comes with 100ft of 15K mongoose hose on a reel for easy rig in and rig out
- Can haul 5m3 of methanol
- Can pump pure methanol
- Can pump HCl acid or Synthetic blend acid
- Full data recording system with charts available to customer
